Crossbeam Moving Type SBM Series
From Over-height to Super-thin Workpiece Machining – All Done in SBM
- An optimum main structure must be able to withstand the stresses from both the weight of the casting itself and the reaction force generated during machining.
- Starvision SBM Series is rigid enough to resist the deformation.
| Model | Unit | SBM-4228 | SBM-5228 | SBM-6028 |
|---|---|---|---|---|
| Travel | ||||
| X axis | mm | 4,200 | 5,200 | 6,000 |
| Y axis | mm | 2,800 | ||
| Z axis | mm | 1,000 (1,200 - opt.) | ||
| W axis | 1,000 (1,250/1,500 - opt.) | |||
| Spindle nose to table distance | mm | 150-1,150 (650-1,650/1,150-2,150 - opt.) | ||
| Distance between columns (max. workpiece width) | mm | 2,600 (2,550) | ||
| Work table | ||||
| Length | mm | 4,000 | 5,000 | 6,000 |
| Width | mm | 2,000 | ||
| T slot (width x number x pitch) | - | 28x11x180 | ||
| Max. table load | kg | 13,000 | 15,000 | 17,000 |
| Spindle | ||||
| Spindle motor | kW | 22/26 (30/37 - opt.) | ||
| Spindle speed (gear type) | rpm | 4,500 (6,000 - opt.) | ||
| Spindle taper | - | BT 50 / ISO 50 / CAT 50 | ||
| Feed | ||||
| Rapid feed-rate (X/Y/Z/W) | m/min | 10/10/12/2 | 8/10/12/2 | |
| Cutting feed-rate | mm/min | 7,000 | ||
| Accuracy | ||||
| Position accuracy | mm | ±0.005/300; 0.015/ full travel | ||
| P0.035 | P0.045 | |||
| Repeatability | mm | ±0.003 | ||
| Ps0.028 | Ps0.03 | |||
| ATC | ||||
| Tool magazine capacity | pcs | 32 (40/60/90 - opt.) | ||
| Max. tool length | mm | 350 | ||
| Max. tool weight | kg | 20 | ||
| Max. tool size (full tools) | mm | Ø125 | ||
| Max. tool size (next pocket empty) | mm | Ø245 | ||
| Others | ||||
| Power consumption | kVA | 65 | ||
| Compressed air | kg/cm2 | 6.5 | ||
| Machine weight (approx.) | tons | 62 | 64 | 66 |
| Floor space (LxWxH) (approx.) | m | 13.0x7.8x6.6 | 14.8x7.8x6.6 | 16.7x7.8x6.6 |
※All specification are subjected to change without prior notice.
| Model | Unit | SBM-4233/38 | SBM-5233/38 | SBM-6233/38 | SBM-8233/38 | SBM-10233/38 |
|---|---|---|---|---|---|---|
| Travel | ||||||
| X axis | mm | 4,200 | 5,200 | 6,200 | 8,200 | 10,200 |
| Y axis | mm | 3,300/3,800 | ||||
| Z axis | mm | 1,000 (1,200 - opt.) | ||||
| W axis | 1,000 (1,250/1,500 - opt.) | |||||
| Spindle nose to table distance | mm | 150-1,150 (650-1,650/1,150-2,150 - opt.) | ||||
| Distance between columns (max. workpiece width) | mm | 3,100 (3,050) / 3,600 (3,550) | ||||
| Work table | ||||||
| Length | mm | 4,000 | 5,000 | 6,000 | 8,000 | 10,000 |
| Width | mm | 2400 / 2,800 (3,500 - opt.) | ||||
| T slot (width x number x pitch) | - | 28x13x180 | ||||
| Max. table load | kg | 13,000/20,000 | 15,000/24,000 | 17,000/28,000 | 21,000/32,000 | 25,000/40,000 |
| Spindle | ||||||
| Spindle motor | kW | 22/26 (30/37 - opt.) | ||||
| Spindle speed (gear type) | rpm | 4,500 (6,000 - opt.) | ||||
| Spindle taper | - | BT 50 / ISO 50 / CAT 50 | ||||
| Feed | ||||||
| Rapid feed-rate (X/Y/Z/W) | m/min | 10/10/12/2 | 8/10/12/2 | |||
| Cutting feed-rate | mm/min | 7,000 | ||||
| Accuracy | ||||||
| Position accuracy | mm | ±0.005/300; ±0.015/ full travel | ||||
| P0.035 | P0.045 | |||||
| Repeatability | mm | ±0.003 | ||||
| Ps0.028 | Ps0.03 | |||||
| ATC | ||||||
| Tool magazine capacity | pcs | 32 (40/60/90 - opt.) | ||||
| Max. tool length | mm | 350 | ||||
| Max. tool weight | kg | 20 | ||||
| Max. tool size (full tools) | mm | Ø125 | ||||
| Max. tool size (next pocket empty) | mm | Ø245 | ||||
| Others | ||||||
| Power consumption | kVA | 65 | ||||
| Compressed air | kg/cm2 | 6.5 | ||||
| Machine weight (approx.) | tons | 63 | 65 | 67 | 69 | 71 |
| Floor space (LxWxH) (approx.) | m | 13.0x 8.3(13.8x8.8)x 6.6 |
14.8x 8.3(15.8x8.8)x 6.6 |
17.3x 8.3(8.8)x 6.6 |
21.7x 8.3(8.8)x 6.6 |
26.1x 8.3(8.8)x 6.6 |
※All specification are subjected to change without prior notice.
| Model | Unit | SBM-5243/48/53 | SBM-6243/48/53 | SBM-8243/48/53 | SBM-10243/48/53 |
|---|---|---|---|---|---|
| Travel | |||||
| X axis | mm | 5,200 | 6,200 | 8,200 | 10,200 |
| Y axis | mm | 4,300/4,800/5,300 | |||
| Z axis | mm | 1,000 (1,200/1,500 - opt.) | |||
| W axis | 1,000 (1,250/1,500 - opt.) | ||||
| Spindle nose to table distance | mm | 150-1,150 (650-1,650/1,150-2,150 - opt.) | |||
| Distance between columns (max. workpiece width) | mm | 4,100 (4,050) / 4,600 (4,550) / 5,100 (5,050) | |||
| Work table | |||||
| Length | mm | 5,000 | 6,000 | 8,000 | 10,000 |
| Width | mm | 2,800 (3,500 - opt.) | |||
| T slot (width x number x pitch) | - | 28x13x200 (28x17x200 - opt.) | |||
| Max. table load | kg | 24,000 | 28,000 | 32,000 | 40,000 |
| Spindle | |||||
| Spindle motor | kW | 22/26 (30/37 - opt.) | |||
| Spindle speed (gear type) | rpm | 4,200 | |||
| Spindle taper | - | BT 50 / ISO 50 / CAT 50 | |||
| Feed | |||||
| Rapid feed-rate (X/Y/Z/W) | m/min | 10/10/12/2 | 8/10/12/2 | ||
| Cutting feed-rate | mm/min | 7,000 | 6,000 | ||
| Accuracy | |||||
| Position accuracy | mm | ±0.005/300; ±0.015/ full travel | |||
| P0.045 | |||||
| Repeatability | mm | ±0.003 | |||
| Ps0.03 | |||||
| ATC | |||||
| Tool magazine capacity | pcs | 32 (40/60/90 - opt.) | |||
| Max. tool length | mm | 350 | |||
| Max. tool weight | kg | 20 | |||
| Max. tool size (full tools) | mm | Ø125 | |||
| Max. tool size (next pocket empty) | mm | Ø245 | |||
| Others | |||||
| Power consumption | kVA | 65 | |||
| Compressed air | kg/cm2 | 6.5 | |||
| Machine weight (approx.) | tons | 82/84/86 | 85/87/89 | 92/94/96 | 98/100/102 |
| Floor space (LxWxH) (approx.) | m | 15.8x9.3(*)x7 | 17.3x9.3(*)x7 | 21.7x9.3(*)x7 | 26.1x9.3(*)x7 |
(*) - Machine width of floor space increases in direct proportion against the extension of Y travel
※All specification are subjected to change without prior notice.
| Category | Description | SBM Series |
|---|---|---|
| Controller | FANUC 0i-MF controller | |
| FANUC 31i-MB controller | ||
| MITSUBISHI M70 controller | ||
| SIEMENS 840D controller | ||
| HEIDENHAIN TNC640 controller | ||
| Spindle | 22/26 kW spindle motor | |
| 30/37 kW spindle motor | ||
| 4,200rpm 2-step gear drive spindle for SBM-XX43/48/53 | ||
| 4,500rpm 2-step gear drive spindle for SBM-XX28/33/38 | ||
| 6,000rpm 2-step gear drive spindle for SBM-XX28/33/38 | ||
| 8,000/10,000rpm direct drive spindle | ||
| Z/W travel extension / higher column | Z travel 1000mm | |
| Z travel 1200/1500mm | ||
| W travel 1000mm | ||
| W travel 1250/1500mm | ||
| 500/1000mm heightened column (standard Z travel) |
||
| ATC | Automatic Tool Changer 32 tools | |
| Automatic Tool Changer 24/40/60/90 tools | ||
| Splash guard | Semi splash guard | |
| Mechanical | X/Y/Z axes absolute pulse coder | |
| Rigid tapping | ||
| Twin hydraulic cylinders | ||
| Nitrogen balancing system | ||
| Automatic lubrication system | ||
| Spindle oil cooler | ||
| Air blast through spindle | ||
| Manual Pulse Generator | ||
| Working lamp | ||
| 3-color alarm lamp | ||
| RS-232 interface | ||
| Heat exchanger for electrical cabinet | ||
| Water gun and air gun interface | ||
| Cutting coolant system | ||
| Twin auger chip removal system | ||
| Belt type chip conveyor with cart | ||
| Sub-table | ||
| 3 axes manual pulse generator for mold processing | ||
| Coolant through spindle at 20/40/70 bar | ||
| Coolant through tool holder interface | ||
| Air conditioner for electrical cabinet | ||
| Transformer | ||
| Oil skimmer | ||
| Oil mist collector | ||
| Others | Leveling bolts & blocks | |
| Tool box | ||
| CE norm | ||
| Measurement | W axis Heidenhain Linear Scale | |
| X/Y/Z axis Heidenhain Linear Scale | ||
| Automatic tool measuring system | ||
| Automatic work piece measuring system | ||
| 4th axis function | CNC Rotary table | |
| 4th axis preparation | ||
| Milling head function | Manual: 90° angular milling head/ high speed 2-axis milling head/ 2-axis head/ extension head/ boring head | |
| Semi-automatic: 90° angular milling head/ 2-axis head/ extension head/ boring head -V/H ATC and AHS inapplicable |
||
| Automatic: 90° angular milling head/ 2-axis head/ extension head/ boring head | ||
| Vertical/Horizontal Automatic Tool Changer (40/60/90 tools) | ||
| Manual Head Station (Table type) | ||
| Manual Head Station (Arm type) | ||
| Automatic Head Station |
-Standard / -Optional
