DX Series
High Speed. Fast and Precise.
- DX Series is built for efficiency, featuring both high speed and accuracy. With linear guide way design which can achieve a long service life with high accuracy, DX Series is your perfect solution for efficient machining and fast cutting.
| Model | Unit | DX-2216/20 | DX-2716/20 | DX-3216/20 | DX-4216/20 |
|---|---|---|---|---|---|
| Travel | |||||
| X axis | mm | 2,200 | 2,700 | 3,200 | 4,200 |
| Y axis | mm | 1,600 / 2,000 | |||
| Z axis | mm | 800(1,000-opt.) | |||
| Distance from spindle nose to table | mm | 150-950 (150-1,150-opt.) | |||
| Distance between two column | mm | 1,700(1,650) / 2,100(2,050) | |||
| Working table | |||||
| Table Length | mm | 2,000 | 2,500 | 3,000 | 4,000 |
| Table Width | mm | 1,400 / 1,700 | |||
| Table Load | kg | 8,000 | 9,000 | 10,000 | 12,000 |
| T- Slot (Width x Number x Pitch) | mm | 22x7x180 / 22x9x180 | |||
| Spindle | |||||
| Spindle Taper | - | BT-50 / ISO-50 / CAT-50 | |||
| Spindle Speed | rpm | 4,500(6,000-opt.) | |||
| Spindle motor(cont./30 minutes rated) | kw | 18.5 (22-opt.) | |||
| Feed | |||||
| Rapid Traverse(X/Y/Z) | m/min | 24 / 24(20) / 15 | 18 / 24(20) / 15 | ||
| Cutting feedrate | mm/min | 7,000 | |||
| Accuracy | |||||
| Positioning Accuracy | mm | ±0.005 / 300 ; ±0.015 / Full travel | |||
| mm | P0.03 | P0.035 | |||
| Repeatability | mm | ±0.003 | |||
| mm | Ps0.025 | P0.028 | |||
| ATC | |||||
| Tool magazine capacity | pcs | 32 (24/40/60-opt.) | |||
| Max. tool size (full pocket/next pockets empty) | mm | Ø125/245 | |||
| Max. tool length | mm | 350 | |||
| Max. tool weight | kg | 20 | |||
| Others | |||||
| Power required | kva | 65 | 65 | 65 | 65 |
| Pneumatic input pressure | kg/cm2 | 6.5 | |||
| Machine net weight | tons | 19 / 21 | 21 / 23 | 23 / 25 | 27 / 29 |
| Floor space (LxWxH) | m | 8.4x5.1(5.5)x4.7 | 9.4x5.1(5.5)x4.7 | 10.4x5.1(5.5)x4.7 | 12.4x5.1(5.5)x4.7 |
※All specification are subjected to change without prior notice.
| Category | Description | DX Series |
|---|---|---|
| Controller | FANUC 0i-MF controller | |
| FANUC 31i-MB controller | ||
| MITSUBISHI M80 / M830 controller | ||
| SIEMENS 828 / 840D controller | ||
| HEIDENHAIN TNC640 controller | ||
| Spindle | 18.5/22 kW spindle motor | |
| 22/26 kW spindle motor | ||
| 4,200rpm 2-step gear drive spindle | ||
| 8,000rpm 2-step gear drive spindle | ||
| 6,000rpm 2-step gear drive spindle | ||
| 8,000/10,000rpm direct drive spindle | ||
| Z travel extension / higher column | Z travel 800mm | |
| Z travel 1000mm | ||
| Z travel 1200mm | ||
| Z travel 1500mm | ||
| 100mm heightened column (standard Z travel) | ||
| 200mm heightened column (standard Z travel) | ||
| 300mm heightened column (standard Z travel) | ||
| 400mm heightened column (standard Z travel) | ||
| ATC | Automatic Tool Changer 32 tools | |
| Automatic Tool Changer 40/60/90/120 tools | ||
| Splash guard | Semi splash guard | |
| Fully enclosed splash guard (roof excluded) | ||
| Fully enclosed splash guard (roof included) | ||
| Mechanical | X/Y/Z axes absolute pulse coder | |
| Rigid tapping | ||
| Twin hydraulic cylinders | ||
| Nitrogen balancing system | ||
| Automatic lubrication system | ||
| Spindle oil cooler | ||
| Air blast through spindle | ||
| Manual Pulse Generator | ||
| Working lamp | ||
| 3-color alarm lamp | ||
| Heat exchanger for electrical cabinet | ||
| Water gun and air gun interface | ||
| Cutting coolant system | ||
| Twin auger chip removal system | ||
| Chip conveyor with cart | ||
| Sub-table | ||
| 3 axes manual pulse generator for mold processing | ||
| Coolant through spindle at 20/40/70 bar | ||
| Coolant through tool holder interface | ||
| Air conditioner for electrical cabinet | ||
| Transformer | ||
| Oil skimmer | ||
| Oil mist device | ||
| Others | Leveling bolts & blocks | |
| Tool box | ||
| CE norm | ||
| Measurement | Heidenhain Linear Scale | |
| Automatic tool measuring system | ||
| Automatic work piece measuring system | ||
| 4th axis function | CNC Rotary table | |
| 4th axis preparation |
-Standard / -Optional / -Inapplicable / -Depending on the model
