5-Axis V Series
V series Specialized in Aerospace Industry
Starvision V series 5-axis Double Column Machining Center features high speed and high accuracy, perfectly meets the demand for aluminum machining in aerospace industry.
- By maximizing the use of modular design, X axis travel up to 10,200mm, Y axis travel up to 4,300mm and Z axis travel up to 1,200mm.
- Z axis is equipped with four roller type linear guide ways from SCHNEEBERGER, featuring high position accuracy and low abrasion. Four guide ways design offers the best stable support to the headstock.
- HEIDENHAIN linear scale of 3 axes is standard accessory to ensure accuracy.
- HEIDENHAIN TNC 640 controller shows complete and superb motion control for 5-axis machining application.
| Model | unit | V-2222 /28 | V-3222 /28 | V-4222 /28 | V-3231 / 34 | V-4231 / 34 | V-5231 / 34 | V-6231/34 | V-4238 /43 | V-5238 /43 | V-6238 /43 | V-8238 /43 | V-10238/43 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Travel | |||||||||||||
| X axis | mm | 2,200 | 3,200 | 4,200 | 3,200 | 4,200 | 5,200 | 6,200 | 4,200 | 5,200 | 6,200 | 8,200 | 10,200 |
| Y axis | mm | 2,200/2,800 | 3,100/3,400 | 3,800/4,300 | |||||||||
| Z axis | mm | 800(1,000-opt.) | 1,000(1,200-opt.) | 1,000 (1,200/1,500-opt.) | |||||||||
| Spindle nose to table | mm | -10-790(-10-990-opt.) | 110-1,110(110-1,310-opt.) | 140-1,140 (140-1,340-opt.) | |||||||||
| Distance between column (max, workpiece width) |
mm | 1,600(1,550)/2,100(2,050) | 2,500(2,450)/2,800(2,750) | 3,200(3,150)/3,700(3,650) | |||||||||
| Table | |||||||||||||
| Table dimension(W) | mm | 2,000 | 3,000 | 4,000 | 3,000 | 4,000 | 5,000 | 6,000 | 4,000 | 5,000 | 6,000 | 8,000 | 10,000 |
| Table dimension(L) | mm | 1,400/1,700 | 2,000/2,400 | 2,800(3,500-opt.) | |||||||||
| T slot(width x number x pitch) | - | 22x7x180/22x9x180 | 28x11x180/28x13x180 | 28x13x200(28x17x200-opt.) | |||||||||
| Max. table load | kg | 3,000 | 5,000 | 5,000 | 11,000 | 13,000 | 15,000 | 17,000 | 20,000 | 24,000 | 28,000 | 32,000 | 40,000 |
| Spindle | |||||||||||||
| Spindle motor(cont./30 min rate) | kW | 45/45 | 54/54 | 54/54 | |||||||||
| Spindle speed (gear box) | rpm | 20,000(12,500 A100-opt.) | 12,500(20,000 A63-opt.) | 12,500(20,000 A63-opt.) | |||||||||
| Spindle taper |
- | HSK-A63 | HSK-A100 | HSK-A100 | |||||||||
| Feed | |||||||||||||
| Rapid feed-rate (X/Y/Z) | m/min | 24/24/15(24/20/15) | 18/24/15 (18/20/15) | 20/20/15 | 18/20/15 (18/15/15) | 12/20/15 (12/15/15) | 20/20/15 | ||||||
| Cutting feed-rate | mm/min | 15000 | 10,000 | 10000 | |||||||||
| Accuracy | |||||||||||||
| Positioning accuracy | mm | ±0.005/300;±0.015/full travel | |||||||||||
| mm | P0.025 | P0.03 | P0.03 | P0.04 | P0.045 | ||||||||
| Repeatability Other | mm | ±0.003 | ±0.003 | ||||||||||
| mm | Ps0.02 | Ps0.023 | Ps0.023 | Ps0.025 | Ps0.03 | ||||||||
| ATC | |||||||||||||
| Tool magazine capacity | pcs | 40 (60/90-opt.) | 40 (60/90-opt.) | 40 (60/90-opt.) | |||||||||
| Max. tool length | mm | 300 | 400 | 400 | |||||||||
| Max. tool weight | kg | 8 | 25 | 25 | |||||||||
| Max. tool size (full tools) | mm | Ø75 | Ø125 | Ø125 | |||||||||
| Max. tool size (next pocket empty) | mm | Ø150 | Ø250 | Ø250 | |||||||||
| Other | |||||||||||||
| Power consumption | kVA | 100 | 130 | 100 | |||||||||
| Compressed air | kg/cm2 | 6.5x2 | 6.5x2 | 6.5x2 | |||||||||
| Machine weight (approx.) | tons | 21/23 | 25/27 | 29/31 | 42/46 | 46/50 | 52/56 | 57/61 | 58/58 | 63/66 | 71/84 | 87/90 | 101/104 |
| Machine floor space (L x W x H) (approx.) |
m | 8.4x6.1(6.5)x7.8 | 10.4x6.1(6.5)x7.8 | 12.4x6.1(6.5)x7.8 | 10.4x8.1(8.4)x7.8 | 13.4x8.1(8.4)x7.8 | 14.8x8.1(8.4)x7.8 | 17.3x8.1(8.4)x7.8 | 13.2x8.8/9.4x7.8 | 15.2x8.8/9.4x7.8 | 17.2x8.8/9.4x7.8 | 21.2x8.8/9.4x7.8 | 25.2x8.1/9.4x7.8 |
※All specification are subjected to change without prior notice.
| Category | Description | V Series |
|---|---|---|
| Controller | Heidenhain TNC640 controller | |
| Siemens 840D controller | ||
| Spindle | HSK-A63 20,000rpm 45/45 kW(For xx22/xx28) | |
| HSK-A100 12,500rpm 54/54 kW(For xx31/xx34/xx38/xx43) | ||
| Z axis travel | Z axis travel 800mm (For xx22/xx28) | |
| Z axis travel 1,000mm (For xx31/xx34/xx38/xx43 std.) | ||
| Z axis travel 1,200mm | ||
| ATC | Automatic Tool Changer 40 tools | |
| Automatic Tool Changer 60/90 tools | ||
| Splash guard | Semi splash guard | |
| Fully enclosed splash guard (roof excluded) (X<6m) | ||
| Fully enclosed splash guard (roof included) (X<6m) | ||
| Mechanical | X/Y/Z axes rack and pinion type linear system and servo motors (For xx38/xx43) | |
| Z axis roller type linear guide ways | ||
| Z axis twin ballscrews (For xx38/xx43) | ||
| Nitrogen balancing system (For xx22/xx28/xx31/xx34) | ||
| Automatic lubrication system | ||
| Spindle oil cooler | ||
| Air blast through spindle | ||
| Manual Pulse Generator | ||
| Working lamp | ||
| 3-color alarm lamp | ||
| Air dryer | ||
| Air conditioner for electrical cabinet | ||
| Water gun and air gun interface | ||
| Cutting coolant system | ||
| Twin auger chip removal system | ||
| Chip conveyor with cart | ||
| Oil skimmer | ||
| Column type controller panel | ||
| Coolant through spindle at 20/40/70 bar | ||
| Transformer | ||
| Oil mist collector | ||
| Others | Leveling bolts & blocks | |
| Tool box | ||
| CE norm | ||
| Measurement | Heidenhain linear scale | |
| Automatic tool measuring system | ||
| Automatic work piece measuring system |
-Standard / -Optional / -Inapplicable / -Depending on the model
