Compact Type DH Series
A Perfect Realization of Speed and Accuracy Equals to Efficiency.
- With an optimized and rigid one-piece crossbeam and column design plus larger working area.
- The spindle is standard with 10,000rpm/BT-50 direct type spindle features high speed and low power consumption.
- Three axes are equipped with roller type linear guide ways which, comparing to ball type linear guide ways, offer higher rigidity and higher loading capacity.
- X/Y/Z axes rapid feed rate 30/30/30 m/min and cutting feed rate 1 - 10,000mm/min
- With an optional built-in 2-axis rotary table can achieve 5-axis simultaneous machining.
Model | Unit | DH-606 | DH-1107 | DH-1607 |
---|---|---|---|---|
Travel | ||||
X axis | mm | 600 | 1,100 | 1,600 |
Y axis | mm | 600 | 750 | |
Z axis | mm | 350 | 500 | |
Spindle nose to table | mm | 150-500 | 150-650 | |
Distance between columns (max. workpiece width) | mm | 647 (597) | 850 (800) | |
Table | ||||
Table dimension (W) | mm | 600 | 1,100 | 1,600 |
Table dimension (L) | mm | 600 | 750 | |
T-slot (width x number x pitch) | 14 x 5 x 100 | 22 x 7 x 100 | ||
Max. table load | kg | 500 | 1,000 | 1,500 |
Spindle | ||||
Spindle motor | kw | 7.5 | 15 | |
Spindle speed (built-in) | rpm | 30,000 | 20,000 | |
Spindle taper | HSK-E40 | HSK-A63 | ||
Feed | ||||
Rapid feed-rate (X/Y/Z) | m/min | 30 / 30 / 30 | ||
Cutting feed-rate | mm/min | 12,000 | ||
Accuracy | ||||
Position accuracy | mm | ±0.005/300; ±0.015/ full travel | ||
mm | P0.03 | |||
Repeatability | mm | ±0.003 | ||
mm | Ps0.025 | |||
ATC | ||||
Tool storage capacity | pcs | 16T | 20T | |
Max. tool length | mm | 150 | 240 | |
Max. tool weight | kg | 2 | 8 | |
Max. tool size | mm | Ø40 | Ø60 | |
Other | ||||
Power consumption | kVA | 20 | 45 | |
Pneumatic input pressure | kg/cm2 | 5-7 | ||
Machine weight (approx.) | tons | 5 | 11 | 13 |
Machine floor space (LxWxH) (approx.) | m | 2.1x2.3x2.5 | 3.6x3.25x3.2 | 4.5x3.25x3.2 |
Model | Unit | DH-1312 | DH-1612 | DH-2012 |
---|---|---|---|---|
Travel | ||||
X axis | mm | 1,300 | 1,600 | 2,000 |
Y axis | mm | 1,200 | ||
Z axis | mm | 600 (800 - opt.) | ||
Spindle nose to table | mm | 150-750 (150-950 - opt.) | ||
Distance between columns (max. workpiece width) | mm | 1,300 (1,250) | ||
Table | ||||
Table dimension (W) | mm | 1,200 | 1,500 | 1,900 |
Table dimension (L) | mm | 1,100 | ||
T-slot (width x number x pitch) | 22 x 7 x 150 | |||
Max. table load | kg | 2,500 | 3,000 | 4,000 |
Spindle | ||||
Spindle motor | kw | 18.5 / 22 | ||
Spindle speed (direct drive) | rpm | 10,000 | ||
Spindle taper | BT-50 | |||
Feed | ||||
Rapid feed-rate (X/Y/Z) | m/min | 30 / 30 / 30 | ||
Cutting feed-rate | mm/min | 10,000 | ||
Accuracy | ||||
Position accuracy | mm | ±0.005/300; ±0.015/ full travel | ||
mm | P0.03 | |||
Repeatability | mm | ±0.003 | ||
mm | Ps0.025 | |||
ATC | ||||
Tool storage capacity | pcs | 12T | ||
Max. tool length | mm | 300 | ||
Max. tool weight | kg | 20 | ||
Max. tool size (full tools) | mm | Ø125 | ||
Max. tool size (next pockets empty) | mm | Ø180 | ||
Other | ||||
Power consumption | kVA | 50 | ||
Pneumatic input pressure | kg/cm2 | 5-7 | ||
Machine weight (approx.) | tons | 16 | 17 | 19 |
Machine floor space (LxWxH) (approx.) | m | 6.8x5.0x4.2 | 7.2x5.0x4.2 | 7.7x5.0x4.2 |
※All specification are subjected to change without prior notice.
Category | Description | DH-606 | DH-xx07 | DH-xx12 |
---|---|---|---|---|
Controller | FANUC 0i-MF controller | |||
FANUC 31i-MB controller | ||||
MITSUBISHI M70 controller | ||||
SIEMENS 840D controller | ||||
HEIDENHAIN TNC640 controller | ||||
Spindle | 7.5 kW spindle motor | |||
15 kW spindle motor | ||||
18.5/22 kW spindle motor | ||||
22/26 kW spindle motor | ||||
8,000rpm 2-step gear drive spindle | ||||
10,000rpm direct drive spindle | ||||
10,000rpm built-in spindle | ||||
15,000rpm direct drive spindle | ||||
20,000rpm built-in spindle | ||||
30,000rpm built-in spindle | ||||
Z axis travel | Z axis travel 350mm | |||
Z axis travel 500mm | ||||
Z axis travel 600mm | ||||
Z axis travel 800mm | ||||
ATC | Automatic Tool Changer 12 tools | |||
Automatic Tool Changer 16 tools | ||||
Automatic Tool Changer 20 tools | ||||
Automatic Tool Changer 24 tools | ||||
Automatic Tool Changer 32 tools | ||||
Splash guard | Fully enclosed splash guard (roof excluded) |
|||
Fully enclosed splash guard (roof included) |
||||
Mechanical | X/Y/Z axes absolute pulse coder | |||
Rigid tapping | ||||
Automatic lubrication system | ||||
Spindle oil cooler | ||||
Air blast through spindle | ||||
Manual Pulse Generator | ||||
Working lamp | ||||
3-color alarm lamp | ||||
RS-232 interface | ||||
Heat exchanger for electrical cabinet | ||||
Water gun and air gun interface | ||||
Cutting coolant system | ||||
Twin auger chip removal system | ||||
Chain type chip conveyor with cart | ||||
Sub-table | ||||
3 axes manual pulse generator for mold processing | ||||
Coolant through spindle at 20/40/70 bar | ||||
Coolant through tool holder interface | ||||
Air conditioner for electrical cabinet | ||||
Transformer | ||||
Oil skimmer | ||||
Oil mist collector | ||||
Others | Leveling bolts & blocks | |||
Tool box | ||||
CE norm | ||||
Measurement | Heidenhain Linear Scale | |||
Automatic tool measuring system | ||||
Automatic work piece measuring system | ||||
4th axis function | CNC Rotary table | |||
4th axis preparation | ||||
Milling head function | Manual: 90° angular milling head/ high speed 2-axis milling head/ universal head/ extend head/ boring head | |||
Manual Head Station (Table type) |
-Standard / -Optional / -Inapplicable / -Depending on the model